log in
I painted this Wayseeker of my Black Hands Corsair Kill Team for Golden Demon 2023. The squad received a pin. The pink is definitely intended and hit exactly the tone I was aiming for. The base is digitally sculpted and 3d printed by myself.
I painted this Wayseeker of my Black Hands Corsair Kill Team for Golden Demon 2023. The squad received a pin. The pink is definitely intended and hit exactly the tone I was aiming for. The base is digitally sculpted and 3d printed by myself.
This unreleased Warlock is one of 3 copies in the world. The legendary Juan Diaz made the conversion and I painted it for Olden Demon 2023.
This Vampire Hunter was handed in at Golden Demon UK 2023 and won me silver. It was kept secret until the very last moment. The unusual yellow and violet was fun and challenging and nobody guessed it would be mine 😜
I painted this Warlock from the plastic release in white thorns to mimic my very old Warlock painted in the last millenium. One arm is from the Skyrunner kit. The cacti plants are self-sculpted in 3d and then printed.
When GW sent me the new 2022 plastic Guardians before release, these were the ones I was looking for the most to paint. The green ended up much brighter than planned, but I love it. The white was my first attempt of strong white reflective material.
I had the honour of receiving and painting up the new 2022 plastic Dark Reapers early before release and got featured on Warhammer-Community with these.
I wanted to give some love to an old 1988 Harlequin sculpt, but giving it a grim and dark feeling despite using strong colours and playful patterns. It earned a finalist pin at Golden Demon UK 2023.
I started them in 2017 and had them resting on my desk for too long. Finally completed, the jungle stalkers of Biel-Tan, my Striking Scorpions. They won 2nd price at Salute 2021, SciFi squad category. It also earned a Commended Entry card at Golden Demon UK 2022.
Freehands turned up to 11 on this one. Vines, thorns, rune with 3d-hover and emboss-effect. I really love the look of the vehicle in general though.
FThe squad is complete. My beloved 1995 Goblin Green was found dead by me just yesterday. I had to mix something for the other bases to match.
I "finished" this squad without bases so far, because I'm planning on using the models for something special. I am quite happy with how the sergeant's helmet turned out. Otherwise the models feel a bit lacking.
I really enjoyed painting this dark and rich blue and I think it turned out very vibrant. The skull on the back is pure freehand, a blast for me to try something this detailed for the very first time.
I always wanted to play around with some reflective white. It's not as shiny as I thought I would go for at first, but using that style, it's more in line with my other Imperial Fists.
I actually didn't plan to paint this until GW-Fanworld decided to have a painting compo with the Indomitus box as central topic. Painted in just under 30 hours.
I painted this for the Golden Demon Winners Challenge 2019/2020. Two Primaris Infiltrators in camouflage searching for a missing Sister of Battle. One of them being an Apothecary, the other calling in via com to the mission control.
I finished this as part of my Striking Scorpions squad and won first place at the online painting competition held by GWFanworld. It also earned a Commended Entry card at Golden Demon UK 2022.
I felt like giving justice to some models I started my hobby with and at GWFW a fitting competition at the same time was called 'twins' which I joined (got first place). So here they go.
One of my earliest miniatures, pretty bad photo setup so that the picutures came out very dark and hidding a lot of Details.
One of my first attempts of using the airbrush. A lot of room to improve ;D
This is a Chaos Chimera i painted about one year ago. Each head shall show the devotion to one of the Chaos gods. The pillar didn't came out perfect, the seam line between the plastic and the clay is not hidden very well.
This is my Version of the Blood Island Rat Ogre. I decided to paint this Rat Ogre as a albino rat. The fur was very challenging but im pretty happy with the result.
One of my first miniatures.The Idea was to build up a mini diorama with Capt.Karlaen on a Space Hulk fighting a Genestealer. The base is from Micro Art Studio and the brood Nest is sculped with Greenstuff and Vallejo Still Water.
Another mini diorama from me. Tried to capture a battle field feeling here, the last standing Dark Angel defending a holy artifact of the chapter.
I smaller project, base is completely from scratch. The bone part of the steed was pretty challenging.
A miniature from Mierce Miniatures, rly like the sculpt and the details. The base is completely from scratch.
The usual issue when making a photo also riddled me here: Issues I will need to fix later on. These Hellblasters may be used in a different project later on, so enough time to get back to them.
Experimented a lot with resin this time to create a clear water base. Not everything went the ways i like but thats the normal process.
I painted this guy as a birthday gift for a friend and choose a bit different scheme for the axeblade.
Painted this guy as a small project between some bigger ones. Tried to make to base look like a necron crypt which comes out of the sand on a forgotten world.
GW-Fanworld decided to boost people's painting ambitions by making a minor competition every month. So I joined and completed this within 20 days. It clocked in at about 25 hours of work in total. A rather fast paint job, but I like the outcome.
I wanted to complete a full squad instead of having just a single one finished, so I started painting a few Primaris Fists in a batch. Not the best paintjobs and not the most detailled ones, but I think they work quite wel.
Blood runs... Anger rises... Death wakes. War calls! The title of my board for Armies on Parade 2019. Meant to represent the Biel-Tan swordwind recapturing an old Eldar-planet, a paradise burned down. It won me silver overall and also the categories Best Painted and Monsters & Machines.
I painted this one up for Everchosen 2019. The cloak offered a good opportunity to turn wild with freehands and the vines and thorns with drop-shadow. The feathers were quite a challenge as I wanted them to be highly reflective. The model didn't make the first cut in store, so it didn't progress at the competition. It won gold at Salute 2021 SciFi single figure, though. After that, it was shattered to pieces by the staff accidentally.
I had to paint a little side-project while working on my Striking Scorpions. Something awesome and something to complete in much less time due to being a single mini. I included pictures of the entire process that I went through.
Biel-Tan Vyper Jetbikes in all their glory. I liked the idea of the pilots and gunners having these velvet soft jackets in something that might or might not be bright leather. At first I thought of painting the gems on both Vypers differently, then decided against it.
I decided to finish my remaining two Vypers and since I have changed my style and improved on my freehands over time, these two both are painted with the usual mottled effect and the 3d drop shadow effect on the vines.
I decided to pimp up the white surfaces a little more with the same 3d effects for the thorn-pattern to look like engraved. It earned a Commended Entry card at Golden Demon UK 2023.
I finally finished my Forge World Phantom Titan for my Craftworld Biel-Tan / Ynn'eal-Tan. I started assembling and painting this model in 2012 shortly after it's release and it took more than 350 hours of work in total. The motivation to finish this model had been very low. But Warhammer Fest came to Düsseldorf and I got it done for the show and won bronce!
I finished the Exarch for my Biel-Tan / Ynn'eal-Tan bladestorm to accompany the squad in order to hand them in for Golden Demon at Warhammer Fest Europe 2018. They earned a Commended Entry card!
The other side of the knee with the rune of Biel-Tan. Also painted in NMM (non-metallic-metal) with a drop-shadow to give it more defition and elevation.
I painted a rune on the side of the Phantom Titan's knee. It's the rune of Ynnead which is the Aeldari god of the dead. Painted in NMM gold (non-metallic-metal) with a fake drop shadow to give it a 3d effect.
The cockpit of the Eldar Phantom Titan with the pilot seat. I kept the armour green as the rest of the titan to fit the Craftworld. The surrounding shall reflect bright wood or wraithbone. With contrasting deep orange gems.
Because a simple vane pattern wasn't popping enough. I think adding a fake 3D effect helped massively to give it an impressive look.
I decided that going for just plain white holofins would be a too boring waste compared to the rest of the detailled body of the Phantom Titan and thus have been exprimenting with a thorns patter which would be subtle enough to still give them a white feeling.
My Striking Scorpions, fitting in shrine green and black undersuit as all my newer aspect warriors. Black areas partly done, green done.
60 more gems to do until this Wraithknight is finally finished and may serve my Biel-Tan swordwind Aeldari.
Finally finished this Leviathan Dreadnought in awesome Imperial Fists yellow! That thing is a monster. I wasn't aware of how big this beast actually is because I was painting the parts separately. But boy, it is huge. Equipped with Cyclonic Melta Lance and Siege Claw.
Not a Golden Demon entry for sure and unusual plasma gun colour, but I had to paint one of these guys. Straight from the Dark Imperium box a Primaris Hellblaster to support my other Space Marines. Now only the rest of the squad needs to be completed.
Some heavy steel claws for the Leviathan, painted in NMM
I heard ya like big guns? :D I still need to apply weathering to the black areas, so lots of scratching to do and that little bump right in the middle
It's kind of sad that all the interior details of this Leviathan will not be visible when the weapon-arms will get attached. At least it's magnetised!
Just a minor update on some heavy support Leviathan Dreadnought for my Imperial Fists Space Marine chapter. Currently I'm done with the legs, hips, armour plates and backpacks. Upper body interior mechanics still need to be painted and the weapons. There's light at the end of the tunnel.
I really gotta get forward with my Swordwind army and that means I need some heavy hitting long-range-support. The Eldar Lynx is a pretty solid choice for that and that allowed me to practice some more green Biel-Tan marble-pattern texturing. Freehands still missing as this is heavy work in progress and far from finished.
I've finished with the green marble pattern and white panels for my second Nightwing. Next up will be freehand thorns with drop shadows and Craftworld specific iconography.
My Ynnari force of the Biel-Tan splinter fleet Ynn'eal-Tan needs some heavy support. I'm satisfied how the marble-pattern and thorns turned out thus far. But I'm not finished yet.
Many people asked me how I do my green marble pattern for my Biel-Tan / Ynn'eal tan schema, so I made a tutorial.
The 2nd Nightwing to support my Ynnari force. The upper side will be typical Biel-Tan / Ynn'eal-Tan green and thorns.
To support my side-project with some heavy support, I painted some Devastator Marines I got for cheap. I equipped them all with plasma cannons.
A side-project of mine is to expand on my Space Marines as 2nd playable home-army. These are some basic troops to fill the ranks.
This is one of the most basic Stormcast Eternal Liberator miniatures available and it got painted for a competition where everyone had to use this miniature. Painted entirely in NMM gold (non-metallic metal). I ranked 2nd place.
This is one of the most basic Space Marines miniatures available and it got painted for a competition where everyone had to use this miniature. Painted in NMM (non-metallic-metal) to give it a shiny appearance. I ranked 3rd place.
It feels like I am painting this thing for ages. But I wanted something spectacular. So I improved my Ynn'eal-Tan / Biel-Tan color schema even more with marble patterns, drop-shadows and freehands.
The last metal aspect models from GW. The hair nearly made me go mad and took me most of the time of these models. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army. They won a Commended Entry Card at Golden Demon EU 2018.
Still 2nd edition models, because GW had not released new versions in 2016 yet. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
I've been experimenting with colours and I thought a glowing blue would surely made them pop. To contrast it, I selected a black and slightly rusted grey armour.
Classic Jes Goodwin plastic jetbikes from the 2nd Edition with metal shrieker cannon upgrades. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
At the time of painting the most recent version of the models. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
This Farseer was the last metal model and part of the Farseer with bodyguard box. I tried some provocative colors. It got a finalist pin at Golden Demon Warhammer Fest EU 2018.
Probably one of the first Eldar-miniatures I ever owned. It is the classic version, a very nice miniature-design I think.
One of my first models using blending techniques. Classic 2nd Edition model.
I first painted it in 1998 with dry-brushing, but reworked it in 2008 entirely.
I tried a little bit of a more modern coloring on these, but still something that was supposed to pop. 2nd Edition models. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
I painted this Fire Dragon as test to see if the colours would match my expectations. I like the firey, flamey look this guy got, so I went for a full squad.
Painted in a very 1990-style schema. Not something I'd do again though ;)
Two Avengers I painted in 2009 to complete the squad. 2nd Edition models. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
Squad painted around 1999, two more painted in 2009. 2nd Edition models. Part of my Ynn'eal-Tan / Biel-Tan Swordwind army.
I started painting this in 2005, but added more thorns and a proper base much later. I won a local GW painting compo with it.
I customized the turret and added shapes to the front and back, since I don't like the standard Serpent turrent very much.
I started painting this in 2010, but I will probably completely repaint it using a marble pattern.
I painted this Wayseeker of my Black Hands Corsair Kill Team for Golden Demon 2023. The squad received a pin. The pink is definitely intended and hit exactly the tone I was aiming for. The base is digitally sculpted and 3d printed by myself.
![Eldar Corsairs Wayseeker [image 1]](../../minis-db/eldar-corsairs-wayseeker-1.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 2]](../../minis-db/eldar-corsairs-wayseeker-2.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 3]](../../minis-db/eldar-corsairs-wayseeker-3.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 4]](../../minis-db/eldar-corsairs-wayseeker-4.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 5]](../../minis-db/eldar-corsairs-wayseeker-5.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 6]](../../minis-db/eldar-corsairs-wayseeker-6.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
![Eldar Corsairs Wayseeker [image 7]](../../minis-db/eldar-corsairs-wayseeker-7.jpg "Eldar Corsairs Wayseeker (#Eldar #Aeldari #Corsairs #Black Hands #Golden Demon)")
#eldar
#aeldari
#corsairs
#black hands
#golden demon
#all
Related: #10, #11, #23, #32, #83